HP 5300XL, 5304XL, 5348XL dit, Tagged, Untagged VLANs, Untagged, or Forbid), Figure 11-10.Example of VLAN Port Assignment Screen

Port-Based Virtual LANs (VLANs) and GVRP

Port-Based Virtual LANs (Static VLANs)

Default: In this example, the “VLAN-22” has been defined, but no ports have yet been assigned to it. (“No” means the port is not assigned to that VLAN.)

Using GVRP? If you plan on using GVRP, any ports you don’t want to join should be changed to “Forbid”.

A port can be assigned to several VLANs, but only one of those assignments can be “Untagged”.

N o t e

Figure 11-10. Example of VLAN Port Assignment Screen

2.To change a port’s VLAN assignment(s):

a.Press ￿￿￿ (for Edit).

b.Use the arrow keys to select a VLAN assignment you want to change.

c.Press the Space bar to make your assignment selection (No, Tagged,

Untagged, or Forbid).

For GVRP Operation: If you enable GVRP on the switch, “No” converts to “Auto”, which allows the VLAN to dynamically join an advertised VLAN that has the same VID. See “Per-Port Options for Dynamic VLAN Advertising and Joining” on page 11-39.

Untagged VLANs: Only one untagged VLAN is allowed per port. Also, there must be at least one VLAN assigned to each port. In the factory default configuration, all ports are assigned to the default VLAN (DEFAULT_VLAN).

For example, if you want ports A4 and A5 to belong to both DEFAULT_VLAN and VLAN-22, and ports A6 and A7 to belong only to VLAN-22, you would use the settings in figure page 11-15.(This example assumes the default GVRP setting—disabled—and that you do not plan to enable GVRP later.)

11-14