HP 5300XL, 5304XL, 5348XL Figure B-22.Example of Configuring VLAN Monitoring, Figure B-23.Examples of Removing Ports as Monitoring Sources

Monitoring and Analyzing Switch Operation

Interface Monitoring Features

Elements in the monitor list can include port numbers, static trunk names, and the mesh at the same time.

For example, with a port such as port A6 configured as the monitoring (mirror) port, you would use either of the following commands to select these interfaces for monitoring:

•A1 through A3, and A5

•Trunks 1 and 2

•Meshing

From the global config level, selects ports and trunks for monitoring sources.

Selects the interface context level, then selects the ports as monitoring sources.

Figure B-21. Examples of Selecting Ports and Static Trunks as Monitoring Sources

To monitor a VLAN:

Configure monitoring of VLAN 20.

Display current monitoring configuration:

– Monitor port

– Interface Being Monitored

Figure B-22. Example of Configuring VLAN Monitoring

These two commands show how to disable monitoring at the interface context level for a single port or all ports in an interface context level.

These two commands show how to disable monitoring at the global config level for a single port or a group of ports.

Figure B-23. Examples of Removing Ports as Monitoring Sources

B-27