HP 5300XL, 5304XL, 5348XL ave, Action, Monitor, show monitor

Monitoring and Analyzing Switch Operation

Interface Monitoring Features

ii.Use the Space bar to select the VLAN you want to monitor.

iii.Go to step 10.

8.Use the down arrow key to move the cursor to the Action column for the individual ports and position the cursor at a port you want to monitor.

9.Press the Space bar to select Monitor for each port and trunk that you want monitored. (Use the down arrow key to move from one interface to the next in the Action column.)

10.When you finish selecting ports to monitor, press ￿￿￿￿￿￿￿, then press ￿￿￿ (for Save) to save your changes and exit from the screen.

11.Return to the Main Menu.

CLI: Configuring Port and Static Trunk Monitoring

Port and Static Trunk Monitoring Commands Used in This Section

show monitor	below
mirror-port	page B-26
monitor	page B-26

You must use the following configuration sequence to configure port and static trunk monitoring in the CLI:

1.Assign a monitoring (mirror) port.

2.Designate the port(s) and static trunk(s) to monitor.

Displaying the Monitoring Configuration. This command lists the port assigned to receive monitored traffic and the ports and/or trunks being monitored.

Syntax: show monitor

For example, if you assign port A6 as the monitoring port and configure the switch to monitor ports A1 - A3, show monitor displays the following:

B-25