Chapter 1

To load an original in the ADF

Use these steps to load a document in the ADF.

1.Load your original print-side up into the ADF.

a.

If you are loading an original printed in portrait orientation, place the pages

 

so that the top edge of the document goes in first. If you are loading an

 

original printed in landscape orientation, place the pages so that the left

 

edge of the document goes in first.

b.

Slide the media into the ADF until you hear a tone or see a message on the

 

display indicating that the loaded pages were detected.

TIP: For more help on loading originals in the ADF, refer to the diagram engraved in the document feeder tray.

2.Slide the width guides inward until they stop at the left and right edges of the media.

NOTE: Remove all originals from the document feeder tray before lifting the lid on the printer.

Load media

This section provides instructions for loading media into the printer.

This section contains the following topics:

•Load standard-size media

•Load envelopes

•Load cards and photo paper

•Load custom-size media

20 Get started