Chapter 1
3.Insert the media
NOTE: Do not load paper while the printer is printing.
4.Slide the media guides in the tray until they touch the edge of the stack of media.
5.Lower the output tray.
6.Pull out the tray extender.
Insert a memory device
Using the USB port on the front of the printer, you can connect a USB storage device. You can also transfer files from the storage device to your computer or scan files to the memory device from the printer.
CAUTION: Attempting to remove a memory device while it is being accessed can damage files on the memory device. You can safely remove a memory card only when the status light is not blinking.
NOTE: The printer does not support encrypted memory devices.
For more information about memory devices that can be used with the printer, see Memory device specifications.
To connect a storage device
Use these instructions to connect a storage device
▲Insert the USB storage device.
NOTE: If your USB device does not fit into this port due to size limitations, or if the connector on the device is shorter than 11 mm (0.43 in), you will need to purchase a USB extension cable in order to use your device with this port.
24 Get started