4.Slide the paper-width guides in the tray until they touch the edge of the stack of paper, and then close the tray.

5.A message appears on the control panel display prompting you to change the paper setting if you have changed the media type, or retain the setting if you have replaced what was previously loaded.

6.Pull out the output tray extension.

Load an original on the scanner glass

You can copy, scan, or fax originals by loading them on the scanner glass.

NOTE: Many of the special features do not work correctly if the scanner glass and lid backing are

not clean. For more information, see Maintain the printer.

NOTE: Remove all originals from the document feeder tray before lifting the lid on the printer.

To load an original on the scanner glass

1.Lift the scanner lid.

16 Chapter 2 Get started

ENWW