NOTE: The
To set the dial type
1.From the printer control panel display, touch Setup.
2.Touch Fax Setup, and then touch Preferences.
3.Touch Dial Type.
4.Touch to select Tone Dialing or Pulse Dialing.
Set the redial options
If the printer was unable to send a fax because the receiving fax machine did not answer or was busy, the printer attempts to redial based on the settings for the redial options. Use the following procedure to turn the options on or off.
●Busy redial: If this option is turned on, the printer redials automatically if it receives a busy signal. The default is On.
●No answer redial: If this option is turned on, the printer redials automatically if the receiving fax machine does not answer. The default is Off.
●Connection problem redial: If this option is turned on, the printer redials automatically if there has been a problem connecting with the receiving fax machine. Connection problem redial works only for sending faxes from memory. The default is On.
To set the redial options
1.From the printer control panel display, touch Setup.
2.Touch Fax Setup, and then touch Preferences.
3.Touch Auto Redial.
4.Touch Busy Redial, or No Answer Redial, or Connection Problem Redial, and then select the appropriate options.
Set the fax speed
You can set the fax speed used to communicate between your printer and other fax machines when sending and receiving faxes.
If you use one of the following, setting the fax speed to a slower speed might be required:
●An Internet phone service
●A PBX (private branch exchange) system
●Fax over Internet Protocol (FoIP)
●An integrated services digital network (ISDN) service
If you experience problems sending and receiving faxes, try using a slower Fax Speed. The following table provides the available fax speed settings.
Fax speed setting | Fax speed |
|
|
Fast | v.34 (33600 baud) |
|
|
56 Chapter 5 Fax | ENWW |