Chapter 7 Optimizing your HP Jornada 141

Setting a Primary Password

Use the Primary tab to set your primary password, and enable primary password protection. With primary password protection enabled, you must enter your password each time you start your HP Jornada or open the HP security application.

To set a primary password and enable primary password protection:

1.On the Primary tab, tap the Primary Password text input box and type the password of your choice. (A password may contain up to 40 case-sensitive, alpha-numeric characters.)

2.Tap the Confirm text input box and type the password you have chosen again.

3.Select the Enable Primary Password Protection check box to activate password protection.

4.Click OK to exit and save your settings.

Passwords are alpha-numeric and case-sensitive. Be sure to

deactivate the numeric keyboard (+ ) and /or

capslock (+ ) before setting or entering your password. Keystrokes may not be recognized as you intended if

either of these icons appear in the status area of the

task bar. Use the key combinations shown above to deactivate these keyboard features before setting or entering your passwords. (See Using the HP Jornada keyboard in Chapter 2 for information about using the numlock and capslock keys.)

To disable primary password protection:

·On the Primary tab, tap the Enable Primary Password

Protection check box to remove the check mark and disable password protection.

NOTE: Even with primary password protection disabled, you will be prompted for your password each time you open HP security unless you delete your password as described below.