Using the LAN

You can use the 10/100 Base-T LAN module to connect your

Notebook to a network.

To connect the LAN module to the network, complete the following steps:

1.Turn off your Notebook.

2.Attach the provided core to the LAN cable before connecting the cable.

3.Open the core.

4.Wind your LAN cable around the core for 1.5 circles and close the core, leaving 1 ~ 5 cm between the core and the connector end.

5.Connect the core end of the LAN cable to the LAN port of your Notebook and the other end to the network hub.

6. Turn on your Notebook.

PRESARIO MOBILE INTERNET PC BEYOND SETUP GUIDE

USING YOUR NOTEBOOK 3-15

800 SERIES