4.Move to Set Supervisor Password. Press the Enter key.

5.Set your personal password, and press the Enter key. You must confirm the password and press the Enter key again.

ÄCaution: Write your password down in a secure location. If you forget or lose your password, a Compaq service technician must reset your Notebook for you to be able to access your files.

6.Move to Password on boot using the + or − keys to select Enable.

7.Using the arrow keys, select Exit from the menu bar.

8.Make sure that Exit Saving Changes is selected. Press the Enter key.

9.Select Yes to save your changes and exit.

Your power-on password is now set. Every time you turn on your Notebook, resume working from hibernation mode, or access F10 Setup, you must enter this password.

Removing the Password

To remove a power-on password, complete the following steps:

1.Access F10 Setup as above, enter your current password, and press the Enter key. In the spaces to enter your new password and confirm new password, press the Enter key. Press the Enter key again to exit the screen.

2.Move to Password on boot using the + or − key to select Disable.

3.Using your arrow keys, select Exit from the menu bar.

4.Make sure that Exit Saving Changes is selected. Press the Enter key.

5.Select Yes to save your changes and exit.

3-18 USING YOUR NOTEBOOK

PRESARIO MOBILE INTERNET PC BEYOND SETUP GUIDE

 

800 SERIES