A6A7 YTX Current Driver Replacement

Note

For location of hardware and cables referred to in this procedure, see Figure 3.

!il

Removal

1.Remove ac line cords and RF Section bottom cover.

2.Disconnect 5-pin connector @ and ribbon cable @ from A6A7.

3.Remove two screws @ and remove A6A7 from RF Module.

Installation

4.Place A6A7 in RF Module and replace two screws 0.

5.Reconnect 5-pin connector @ and ribbon cable @ to A6A7.

6.Replace bottom cover on RF Section and reconnect ac line cords.

( 2 P L A C E S )

Figure 3. A6A7 YTX Current Driver Replacement

6 A6 A7/A6 AS/A6 A8