3.Remove clear plastic shield from motherboard (Figure 1) by removing all screws. Remove eight screws @ from the motherboard.

Note

Screws are marked on motherboard with the letter B for easy identification.

C L E A R

P L A S T I C

IIS H I E L D

Figure 1. A7 M/N Reference Removal and Installation

4.Position A7 section in RF Section and secure with eight screws 0. Replace clear plastic shield over motherboard. Reconnect cables removed in step 2.

5.Replace RF Section top and bottom covers. Reassemble IF-Display Section to RF Section. Reconnect ac line cords.

A7 3