Print from a
This section describes the procedure for printing from a PictBridge digital camera. The procedure for printing from other PictBridge
NOTE: If you disconnect the camera while printing, all print jobs are cancelled.
To print using a
1.Load HP Advanced Photo Paper into the printer.
2.Turn on the
3.Make sure the USB configuration setting of the camera is set to Digital Camera, and then connect the camera to the camera port of the printer using the USB cable that came with the
See the camera documentation for more information about the USB configuration setting. The name of the setting and its options may differ on
4.If you already selected photos for printing on the camera, the Print DPOF Photos? dialog box is displayed on the camera. Select No to bypass printing
5.Use the options and controls on your camera to print your photos. See the camera documentation for more information. The On light and the PictBridge light flash while the photos are printing.
Important: Your photos are instantly dry, and can be handled immediately after they are printed. However, HP recommends that you leave the printed surface of your photos exposed to the air for 3 minutes after printing to allow the colors to fully develop before you stack them with other photos or place them in albums.
Print from a Bluetooth device
This section describes how to print from any device with Bluetooth wireless technology, a
To use Bluetooth connectivity with the HP Photosmart A520 series printer, you must purchase and connect the optional HP Bluetooth® wireless printer adapter to the camera port on the front of the printer. To learn how to print from a Bluetooth device, see the documentation that came with your Bluetooth adapter.
This section contains the following topics:
•Print photos from a Bluetooth device
NOTE: For more information on Bluetooth wireless technology and HP, go to www.hp.com/go/bluetooth.
Print from a | 19 |