Installing the A6828A Adapter
Specifying SCSI Parameters
If you want to retain the maximum data transfer rate, type main to go back to the “Main Menu”.
If you want to change the data transfer rate (for example, to troubleshoot communications between the adapter and an
c.If you are still in the “Service Menu,” type the following command:
scsi path rate new_data_rate
where, path is the HBA’s path and new_data_rate is what you want to change the HBA’s maximum data transfer rate to (ULTRA, for this example).
Therefore, using the information for the HBA in step b, type the following:
scsi 0/0/10/0/0 rate ultra
This changes the HBA’s maximum data transfer rate to ULTRA (40 MB/s).
To ensure that the data transfer rate has changed, you can repeat step b to display the HBA’s transfer rate.
When your troubleshooting is complete, and you want to change the adapter’s transfer rate back to MAX, go to step d.
d.If you are still in “Service Menu”, type the following command:
scsi path rate new_data_rate
where, path is the HBA’s path and new_data_rate is what you want to change the HBA’s maximum data transfer rate to (MAX, for this example).
Therefore, using the information for the HBA in step c, type the following:
scsi 0/0/10/0/0 rate nolimit
This changes the HBA’s maximum data transfer rate back to MAX (160 MB/s).
To ensure that the data transfer rate has changed, you can repeat step b to display the HBA’s transfer rate.
When you are satisfied that the maximum data transfer rate is set correctly, type main to go back to the “Main Menu.”
Chapter 2 | 31 |