Installing the A6828A Adapter
Specifying SCSI Parameters
Adapter Properties |
| ||
Adapter | PCI | PCI | PCI |
| Bus | Device | Function |
53C875 | 60 | 01 | 01 |
<Device Properties> |
|
Boot Support | [Enabled] |
SCSI Parity | [Yes] |
Host SCSI ID | [ 5] |
SCSI Bus Scan Order | [Low to High (0..Max)] |
Spinup Delay (Secs) | [ 2] |
Secondary Cluster Server | [Yes] |
Termination Control | [Auto] |
<Restore Defaults> |
|
| Step | 5. Use the arrow keys to highlight the Device Properties option, and press | ||||||
|
| the [Enter] key. This displays the Device Properties screen; refer to the | ||||||
|
| following example: |
|
|
|
|
| |
Device Properties |
|
|
|
|
|
| ||
SCSI | Device Identifier |
| MB/Sec | MT/Sec | Data | Scan | Scan | |
ID |
|
|
|
|
| Width | ID | LUNs > 0 |
0 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
1 | HP 18.2GST318406LC | HP05 | 160 | [80] | [16] | [Yes] | [Yes] | |
2 | HP 18.2GST318406LC | HP05 | 160 | [80] | [16] | [Yes] | [Yes] | |
3 | HP 18.2GST318406LC | HP05 | 160 | [80] | [16] | [Yes] | [Yes] | |
4 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
5 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
6 |
| 160 | [80] | [16] | [Yes] | [Yes] | ||
7 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
8 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
9 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
10 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
11 | HP 18.2GST318406LC | HP05 | 160 | [80] | [16] | [Yes] | [Yes] | |
12 | HP 18.2GST318406LC | HP05 | 160 | [80] | [16] | [Yes] | [Yes] | |
13 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
14 | - |
|
| 160 | [80] | [16] | [Yes] | [Yes] |
15 | HP | A6491A | HP16 | 160 | [80] | [16] | [Yes] | [Yes] |
To change the bus width of the required device, use the arrow keys to highlight the corresponding option under the Data Width column, and then use the plus (+) or minus
46 | Chapter 2 |