|
| Troubleshooting |
|
| Setting and Confirming SCSI Parameters |
Step | 5. | Press the [ESC] key to exit the Adapter Properties screen. |
|
| If you did not modify any of the SCSI parameters, then the Global |
|
| Properties screen appears. |
|
| However, if you modified any of the SCSI parameters, then the following |
|
| screen appears: |
|
| Adapter and/or device property changes have been made. |
|
| <Cancel Exit> |
|
| <Save changes then exit this menu> |
|
| <Discard changes then exit this menu> |
|
| Exit the Configuration Utility |
|
| Use the arrow keys to highlight your selection from the listed choices, |
|
| and then press the [ENTER] key to return to the Global Properties |
|
| screen. |
Step | 6. | Press the [ESC] key. This displays the following screen: |
|
| Are you sure you want to exit? |
|
| <Cancel Exit> |
|
| Save changes then exit this menu |
|
| Discard changes then exit this menu |
|
| <Exit the Configuration Utility> |
|
| Use the arrow keys to highlight your selection from the listed choices, |
|
| and then press the [ENTER] key to return to the EFI shell prompt. |
Step | 7. | At the EFI shell prompt, issue the following command to reboot the |
|
| system: |
|
| reset |
|
|
|
NOTE |
| The system reboot is required for the new setting to take effect. |
|
|
|
Chapter 3 | 79 |