Installing the A6828A Adapter
Adding Multi-Initiator Support
Multi-Initiator Support for Itanium®-Based System
If you need multi-initiator support for HP A6828A SCSI HBA installed in an Itanium®-based system, perform the following steps:
Step 1. Ensure that the part number of the HBA is A6828A-60101. Step 2. Install the driver patch, PHKL_28566.
Multi-Initiator Support for PA-RISC Based System
If you need multi-initiator support for HP A6828A SCSI HBA installed in a PA-RISC based system, perform the following steps:
Step | 1. | Ensure that the part number of the HBA is A6828A-60101. |
Step | 2. | Install the appropriate driver patch. Refer to Table 2-5 for information |
| | on the patch you need to install on your system. |
Table 2-5 | | Mapping of System Version to Driver Patch |
| | | | |
| | System Version | Driver Patch | |
| | | | |
| | HP-UX 11.0 | PHKL_27555 | |
| | | | |
| | HP-UX 11i | PHKL_27556 | |
| | | | |
