Installing the A6828A Adapter

Verifying Installation

TIP

When the system boots after installation, the insf command creates the

 

proper device files for the “ctl” interfaces (which are usually adapters)

 

and the SCSI devices attached to the A6828A adapter. Sometimes,

 

though, it does not create all of the needed device files.

 

One situation when this happens is when you attach SCSI disks to the

 

adapter after the system boots and the adapter is already installed in the

 

system.

 

In the ioscan output, if you see a SCSI device listed without the second

 

line, that means you are missing that device’s device files. To fix the

 

problem, issue the insf -ecommand, which creates all of the device

 

files.

 

For more information on the ioscan command, see the ioscan(1M) man

 

 

page.

 

Refer to your system documentation for information on verifying system

 

operation.

Chapter 2

57