Troubleshooting
Setting and Confirming SCSI Parameters
Displaying SCSI IDs
To display the initiator SCSI IDs for an adapter using the SCSI command, use the following syntax:
SCSI init bus_number slot_number
where
bus_number Specifies the number of the bus on which the adapter is installed.
slot_number Specifies the number of the slot the adapter is in.
For example:
•To display the SCSI ID for an adapter on bus 5 slot 2, issue the following command:
SCSI init 5 2
The command displays the following output:
PCI device /5.2 = 7
•To list the SCSI IDs for all the bus and slot numbers, issue the following command:
SCSI init
74 | Chapter 3 |