HP AR 18 Router manual Mounting the Router on a Vertical Surface

Installation Manual	Chapter 2 Installing the Router
H3C AR 18-2X Series Routers

2.2.2 Mounting the Router on a Vertical Surface

Mount the router on a vertical surface with four pan-head screws and the four brackets at the bottom of the router.

Caution:

zSecurely anchor these four mounting screws in the vertical surface. If the screws are not properly anchored, strain of the network cable connections can pull the router from the wall.

zInstall the router in such a position that the LEDs can be read easily.

zSecurely fix the external power supply unit of the router, preventing the power cord from falling down.

Follow these steps to mount the router on a wall or other vertical surface:

Step 1: Install four pan-head screws on a wall or other flat vertical surface (with reference to the distance between the four brackets as shown in Figure 2-1), and ensure that each screw sticks out 6 mm (0.24 in.) on the wall.

2-3