HP AR 18 Router manual Upgrading Programs through XModem, Upgrading an application program

Installation Manual	Chapter 3 Starting and Maintaining
H3C AR 18-2X Series Routers	the Router

3.2.3 Upgrading Programs through XModem

When you upgrade software through XModem, you can do that using the console port without having to set up another configuration environment.

I. Upgrading an application program

Step 1: Enter the Boot menu and press <1> to download an application program using XModem. The following download speeds are available for the router:

Downloading application program from serial ...

Please choose your download speed:

1:9600 bps

2:19200 bps

3:38400 bps

4:57600 bps

5:115200 bps

6:Exit and reboot Enter your choice(1-6):

Step 2: Select an appropriate download speed (for example,

115200 bps by entering <5>). The following message appears:

Download speed is 115200 bps. Change the terminal's speed

to 115200 bps, and select XModem protocol. Press ENTER key

when ready.

Step 3: Change your terminal’s baud rate to the same baud rate for software downloading (115200 bps in this example). After that, disconnect the terminal ([Dial-in/Disconnect]), reconnect it ([Dial-in/Dialing]), and press <Enter> to start downloading. The system displays:

3-16