HP AR 18 Router manual II. Upgrading Boot ROM Through FTP

Installation Manual	Chapter 3 Starting and Maintaining
H3C AR 18-2X Series Routers	the Router

As shown in the above display, 1.1.1.1 is the IP address of the TFTP server, and bootromfull is the Boot ROM upgrade file.

4)Execute the following command on the router to upgrade

Boot ROM.

<H3C> system-view

[H3C] upgrade bootrom full

WARNING: This operation will update the Boot ROM. It may result in booting failure.

Caution!!! upgrade bootrom [Y/N]?y

Please wait, it may take a long time

The upgrade succeeds!

5)After the upgrade operation is complete, restart the router so that the upgrade made to the Boot ROM takes effect. After the router is restarted, you can use the display version command to display the current Boot ROM version, or directly enter the Boot ROM menu, so as to verify the upgrade operation.

II. Upgrading Boot ROM Through FTP

1)Connect the FTP server to the router on which Boot ROM is to be upgraded so that they can communicate with each other. An FTP server is a device running the FTP server program.

2)Specify the path on the FTP server to the folder that contains the Boot ROM upgrade file, and set the username and password. As shown in Figure 3-9,configure the username in the Profile text box and set a password. Make sure the currently configured path contains the Boot ROM upgrade

3-23