Using the Peripheral Status Monitor
Monitoring Request Parameters
SNMP traps
This option sends messages to applications using SNMP traps, such as Network Node Manager. See HP OpenView Using Network Node Manager (P/N
The following traps are used by EMS:
EMS_ENTERPRISE_OID EMS_NORMAL_OID EMS_ABNORMAL_OID EMS_REBOOT_OID EMS_RESTART_OID EMS_NORMAL_SEV_OID EMS_WARNING_SEV_OID EMS_MINOR_SEV_OID EMS_MAJOR_SEV_OID EMS_CRITICAL_SEV_OID
"1.3.6.1.4.1.11.2.3.1.7" "1.3.6.1.4.1.11.2.3.1.7.0.1" - Normal notification "1.3.6.1.4.1.11.2.3.1.7.0.2" - Abnormal notification "1.3.6.1.4.1.11.2.3.1.7.0.3" - Reboot notification "1.3.6.1.4.1.11.2.3.1.7.0.4" - Restart notification "1.3.6.1.4.1.11.2.3.1.7.0.5" - Problem Event w/Normal Severity notification "1.3.6.1.4.1.11.2.3.1.7.0.6" - Problem Event w/Warning Severity notification "1.3.6.1.4.1.11.2.3.1.7.0.7" - Problem Event w/Minor Severity notification "1.3.6.1.4.1.11.2.3.1.7.0.8" - Problem Event w/Major Severity notification "1.3.6.1.4.1.11.2.3.1.7.0.9" - Problem Event w/Critical Severity notification
Specify the ITO message severity for both normal and abnormal events:
•Critical
•Major
•Minor
•Warning
•Normal
A specified severity other than Normal is returned under the following conditions:
Certain SNMP trap monitoring requests can map directly to severity levels. For these requests, a toggle button <Map severity from value> is displayed. If this is selected, options selected from <Severity> are ignored.
•The When value is… condition evaluates to TRUE
•The When value changes condition evaluates to TRUE
To set the SNMP trap:
1.Specify the notification type from the <Notify> list.
2.Select the opcmsg ITO option from the <Notify via> list.
3.Select the severity from the <Severity> list, (Critical, Major, Minor, Warning, Normal).
TCP and UDP
This option sends TCP or UDP encoded events to the target host name and port indicated for that request. Thus the message can be directed to a
To set the TCP or UDP conditions:
1.Select the TCP or UDP option, as appropriate, from the <Notify via> list.
2.Specify the target host name and the port.
This option sends event notification to the specified email address
Chapter 4 | 85 |