Removing a Plug-In Accessory Module

(User-Replaceable)

Note

Plug-in accessory modules have no repairable components. A defective module must be exchanged.

Required Equipment

∙None.

Removal Procedure

1.Slide the safety latch for the plug-in slot into its recess.

2.Slide and hold the release latch, then slide out the module.

Figure 2-2. Removing a Plug-In Module

Reassembly Note

Caution

Be sure the safety latch is open before you insert the module. Otherwise, the release latch could break if you force the module in.

∙After installing the module, close the safety latch.

2-4

Removal and Replacement

HP OmniBook 2100/3000/3100