5.Pry out and pop up the right end of the icon window cover at the plug-in module slot, then pop off the cover.

Icon Window Cover

Hinge Cover (2)

Figure 2-7. Removing the Hinge Covers and Icon Window Cover

6.Remove the icon PCA by doing the following:

∙Unplug the IR/icon cable near the right end of the icon PCA.

∙Remove the screw from the left end and lift up the PCA.

∙Unplug the cable from the motherboard.

7.For the LCD cable emerging from the left hinge, remove the screw from the grounding lug inside the base assembly. For a 12-inch display, also remove the second screw holding the LCD cable. Then unplug the cable from the base assembly.

8.For the inverter/MB cable emerging from the right hinge, unplug the cable from the motherboard.

9.Remove the four screws from the hinges, and lift off the display assembly.

2-10 Removal and Replacement

HP OmniBook 2100/3000/3100