3.Open the display fully.

4.Slide off the two plastic hinge covers about 5 mm, then lift them off. Use your finger or a small tool to push outward next to the hinge.

5.Pry out and pop up the right end of the icon window cover at the plug-in module slot, then pop off the cover.

Icon Window Cover

Hinge Cover (2)

Screw Cover (2)

Figure 2-9. Removing the Hinge Covers and Icon Window Cover

6.Pry off the two screw covers by the hinges (use a pointed knife or probe), then remove the two screws.

For a 12-inch display, pry off the two display bumpers at the top of the display, then remove the two additional screws.

HP OmniBook 2100/3000/3100

Removal and Replacement 2-13