¨On any computer that has a CD-ROM drive, run makesupp from the \Omnibook\Drivers\Hputils directory on the OmniBook Recovery CD.

¨On any computer with World Wide Web access, download the Support Utility software package from the OmniBook website (see page vi). Follow the instructions provided.

2.Insert the Recovery CD in the CD-ROM drive—or insert the Support Utility disk in the floppy drive.

3.Reboot the computer. If you are using the Recovery CD, press ESC during reboot if the OmniBook screen appears, ESC to display the boot-device menu, then select the CD-ROM drive as the boot device.

4.When prompted, select “Create Hibernate Partition.”

OmniBook 2100/3100: We recommend that you create a partition the same as the factory setup— 288 MB for a Pentium II CPU, or 192 MB for a Pentium CPU (160 MB is acceptable if the motherboard has only one RAM slot).

OmniBook 3000: We recommend that you create a 144-MB partition, the same as the factory setup.

Removing a RAM Board

(User-Replaceable)

Table 2-5. RAM Board Replacement Part Numbers and Compatibility

Description

Part Number

Exchange

 

OmniBook, CPU Type, RAM Slots

 

 

 

Part Number

 

2100

2100/3100

3000

 

 

 

Pentium II

Pentium

Pentium

 

 

 

 

 

 

Inner Corner

Inner

Corner

Inner

Corner

 

 

 

Slot

Slot

Slot

Slot *

Slot

Slot

RAM, 32-MB SDRAM

1818-7413

F1456-69001

∙

∙

∙

∙

 

 

RAM, 64-MB SDRAM

1818-7414

F1457-69001

∙

∙

∙

 

 

 

RAM, 128-MB SDRAM

1818-7549

F1622-69001

∙

∙

∙

 

 

 

RAM, 16-MB EDORAM

F1363-60001

F1363-69001

 

 

o

o

∙

∙

RAM, 32-MB EDORAM

F1364-60001

F1364-69001

 

 

o

o

∙

∙

RAM, 64-MB EDORAM

F1365-60001

F1365-69001

 

 

o

 

∙

∙

 

 

 

 

 

 

 

 

 

∙Recommended compatibility.

oAlternate compatibility. Do not mix SDRAM and EDORAM boards in two slots.

To determine the CPU type, see the Intel sticker on the top case or see the picture showing the CPU modules on page 2-25.

*The corner RAM slot is not present on an OmniBook 2100/3100 with a Pentium CPU and one-slot motherboard.

Caution

Handle the RAM board only by its edges and provide proper grounding. Otherwise, you may damage the board due to electrostatic discharge.

Required Equipment

∙Small Phillips screwdriver.

HP OmniBook 2100/3000/3100

Removal and Replacement

2-7