Removing the Hard Disk Drive

(User-Replaceable)

Table 2-4. Hard Disk Drive Replacement Part Numbers

Description

Part Number

Exchange

 

OmniBook

 

 

 

Part Number

2100

 

3100

 

3000

Drive, hard disk (2.1GB, 9.5mm, IBM) *

0950-2801

F1385-69100

∙

 

 

 

∙

Drive, hard disk (2.1GB, 12.7mm, Toshiba)

0950-2836

F1350-69100

 

 

 

 

∙

Drive, hard disk (3.2GB, 9.5mm, IBM) *

0950-2802

F1348-69103

∙

 

 

 

∙

Drive, hard disk (3.2GB, 12.7mm, Toshiba)

0950-2854

F1348-69102

∙

 

 

 

 

Drive, hard disk (4.0GB, 12.7mm, IBM) *

0950-2671

F1386-69100

∙

 

∙

 

∙

Drive, hard disk (4.0GB, 12.7mm, Toshiba)

0950-2865

F1386-69101

∙

 

∙

 

 

*Recommended replacement parts. HP recommends stocking drives from IBM, the primary hard drive source for these OmniBook products. IBM drives can be used with the older HDD case that has no top shield (the shield should be installed if it is present). Toshiba hard drives require a top shield as part of the HDD case.

Required Equipment

∙Small Phillips screwdriver.

Removal Procedure

1.Unplug the ac adapter, if present, and remove the battery.

2.Remove the two screws from the bottom of the hard drive.

3.Pull out the hard drive.

Screw, M2.5× 5mm

Figure 2-3. Removing the Hard Drive

Caution

Work the connector off the hard drive evenly, without pulling on the flex cable. Otherwise, you may bend connector pins on the hard drive or damage the flex cable.

HP OmniBook 2100/3000/3100

Removal and Replacement

2-5