Screw, M2.5× 4mm

Keyboard flex cable (part of the keyboard)

Figure 2-16. Removing the Keyboard

Reassembly Notes

Important

After inserting the keyboard into the case, make sure the back edge of the keyboard is underneath the four plastic tabs on the case–you should see a small gap between the front of the keyboard backplate and the top case.

Hint: Insert a Phillips screwdriver into one keyboard screw hole and push it back, then do the same at the other hole.

Removing the Top Case

(HP Authorized Service Providers Only)

Required Equipment

∙Small Phillips screwdriver, preferably magnetized.

Removal Procedure

1. Unplug the ac adapter, if present, and remove the battery.

HP OmniBook 2100/3000/3100

Removal and Replacement 2-21