Serial Port
Base I/O address
Infrared Port
Mode
Sets how the serial port is configured by the BIOS (specified or automatic).
Sets the I/O address and interrupt.
Sets how the infrared port is configured by the BIOS (specified or automatic).
Sets the hardware to support SIR (Standard IR), ASK IR (amplitude shift keyed IR), or FIR (Fast IR) infrared communications. (Driver installation required.)
Enabled
3F8h, IRQ4 (COM1)
Disabled
SIR
Base I/O address | Sets the I/O address and interrupt. | 2F8h, IRQ3 |
|
| (COM2) |
DMA channel | For Fast IR mode, sets the DMA channel. | DMA3 |
Parallel Port | Sets how the parallel port is configured by the BIOS (specified | Enabled |
| or automatic). |
|
Mode | Sets the port to normal, | ECP |
Base I/O address | Sets the I/O address. | 378h |
Interrupt | Sets the interrupt. | IRQ7 |
DMA channel | For ECP mode, sets the DMA channel. | DMA3 |
Audio | Sets how the audio system is configured by the BIOS | Enabled |
| (specified or automatic). |
|
SB I/O address
WSS I/O address
AdLib I/O address
Interrupt
1st DMA channel
2nd DMA channel
OmniBook 3000:
MPU Device
Sets the Sound Blaster I/O address.
Sets the Windows Sound System I/O address.
Sets the AdLib synthesizer I/O address.
Sets the interrupt.
Sets the DMA channel for playback.
Sets the DMA channel for recording.
Sets how the MIDI capability is configured: by the BIOS (specified settings or automatic) or by a PnP operating system. The port replicator provides a MIDI port, but the OmniBook does not.
220h
530h
388h
IRQ5
DMA1
DMA0
Disabled
OmniBook 3000: | Sets the MIDI I/O address. | 330h |
MPU I/O address |
|
|
OmniBook 3000: | Sets the interrupt. | IRQ9 |
Interrupt |
|
|
Security Menu |
| Default |
OmniBook 2100/3100: | Shows if a user password is set. | Clear |
User Password Is |
|
|
OmniBook 2100/3100: | Shows if an administrator password is set. | Clear |
Administrator Password Is |
|
|
OmniBook 2100/3100: | Press ENTER to set, change, or clear user password. |
|
Set User Password | Password length can be no longer than 8 characters, |
|
OmniBook 2100/3100: | Press ENTER to set, change, or clear administrator password. |
|
Set Administrator | This password protects BIOS Setup settings. |
|
Password |
|
|
OmniBook 3000 only:
System Password is
OmniBook 3000 only: Set System Password
Boot
Shows whether a password is set.
Press ENTER to set, change, or clear the password. Password length can be no longer than 8 characters,
Sets whether a user password is required when the computer boots.
Clear
OB 2100/3100:
Enabled
OB 3000:
Disabled
HP OmniBook 2100/3000/3100 |