Chapter 10
Cause: A stack of envelopes was loaded incorrectly.
A blank page came out while printing
Try the following solutions to resolve the issue. Solutions are listed in order, with the most likely solution first. If the first solution does not solve the problem, continue trying the remaining solutions until the issue is resolved.
•Solution 1: Remove any extra pages or lines at the end of the document
a Solve problem
Solution 1: Remove any extra pages or lines at the end of the document
Solution: Open the document file in your software application and remove any extra pages or lines at the end of the document.
Cause: The document you were printing contained an additional blank page. If this did not solve the issue, try the next solution.
Solution 2: Load paper in the input tray
Solution: If the product has only a few sheets remaining, load more paper in the input tray. If there is plenty of paper in the input tray, remove the paper, tap the stack of paper against a flat surface, and reload the paper into the input tray.
Cause: The product picked up two sheets of paper. If this did not solve the issue, try the next solution.
Solution 3: Check the print cartridge
Solution: Check each print cartridge. The tape might have been removed from the
76 Solve a problem