4.Remove the optical drive (3) from the computer.
5.If it is necessary to replace the optical drive bracket, position the optical drive with the rear toward you.
6.Remove the three Phillips screws (1) that secure the optical drive bracket to the optical drive.
7.Remove the optical drive bracket (2).
Reverse this procedure to install an optical drive.
Upgrade bay hard drive
Description | Spare part number |
|
|
Upgrade bay bezel | |
|
|
Before removing the upgrade bay hard drive, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
Component replacement procedures | 69 |