VGA port board
Description | Spare part number |
|
|
VGA port board | |
|
|
Before removing the VGA port board, follow these steps:
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 46).
5.Remove the service door (see Service door on page 52).
6.Remove the following components:
a.Hard drive (see Hard drive on page 63).
b.Upgrade bay device (see Upgrade bay device on page 68).
c.Keyboard (see Keyboard on page 72).
d.Top cover (see Top cover on page 76).
Remove the VGA port board:
1.Position the computer
2.Remove the Phillips screw (1) that secures the VGA port board to the base enclosure.
3.Remove the two Torx 8 screws (2) that secure the VGA port board to the base enclosure.
Component replacement procedures | 87 |