4.Remove the battery (see Battery on page 46).
5.Remove the service door (see Service door on page 52). Remove the upgrade bay hard drive:
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
1.Position the computer upside down with the front side toward you.
2.Remove the four Phillips screws securing the hard drive.
3.Remove the Phillips locking screw (1) that secures the upgrade bay bezel to the computer.
4.Insert a small tool (2) into the drive release opening and press the upgrade bay bezel tab to the left.
5.Remove the upgrade bay bezel (3) from the computer.
6.If it is necessary to remove the hard drive, position the upgrade bay bezel with the front toward you.
7.Loosen the two captive screws (1) that secure the hard drive to the bezel.
70 | Chapter 4 Removal and replacement procedures |
