Hard drive
Description | Spare part number | |
|
|
|
750 | GB, 7200 rpm hard drive | |
|
|
|
500 | GB, 7200 rpm hard drive | |
|
|
|
500 | GB, 7200 rpm , Self Encrypting hard drive (SED) | |
|
|
|
320 | GB, 7200 rpm hard drive, | |
|
|
|
256 | GB SATA III | |
|
|
|
128 | GB SATA III SSD | |
|
|
|
180 | GB SATA II SSD | |
|
|
|
160 | GB SATA II SSD | |
|
| |
Hard Drive Hardware Kit (includes hard drive bracket and screws) | ||
|
|
|
Before disassembling the computer, follow these steps:
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 46).
5.Remove the service door (see Service door on page 52).
Remove the hard drive:
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
1.Position the computer upside down, with the front toward you.
2.Remove the tape from the top of the smart card reader door (1).
Component replacement procedures | 63 |
