TouchPad button board
Description | Spare part number |
TouchPad button board (included with top cover, spare part number
Before removing the TouchPad button board, follow these steps:
IMPORTANT: Make special note of each screw and screw lock size and location during removal and replacement.
1.Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the computer on, and then shut it down through the operating system.
2.Disconnect all external devices connected to the computer.
3.Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and then unplugging the AC adapter from the computer.
4.Remove the battery (see Battery on page 46).
5.Remove the service door (see Service door on page 52).
6.Remove the following components:
a.Hard drive (see Hard drive on page 63).
b.Upgrade bay device (see Upgrade bay device on page 68).
c.Keyboard (see Keyboard on page 72).
d.Top cover (see Top cover on page 76).
Remove the TouchPad button board:
1.Position the top cover upside down, with the front toward you.
2.Release the ZIF connector (1) for the TouchPad button board cable and then disconnect the cable
(2).
3.Remove the four Torx 8 screws (3) that secure the TouchPad button board to the top cover.
Component replacement procedures | 85 |