Before You Install

5Install the laminator supply material (if the printer has a laminator).

6Load cards in the input hopper (if the printer has a hopper).

Do not connect the printer and PC at this time.

7Power on the PC or host computer. Make sure it is fully operational before connecting the printer.

8For a printer connected using the built-in Ethernet port on the printer, connect the network cable to the printer and to the network now.

For a printer connected using a USB cable or a print server, continue with step 9.

9Power on the printer.

a Connect the power supply to the printer.

b Connect the power cable to the power supply.

c Connect the power cable to a facility power source.

d For printers with laminators, push the power switch to On.

Installation Guide

11