Installation on Windows
Network Unidirectional Installation for Windows Vista & Server 2008
Before you begin:
•This installation is possible only on PCs running the Windows Vista or Server 2008 operating systems.
•Use the files on the driver
•Obtain information from your network support personnel.
—You need:
‹Address Mode, either DHCP or Static IP
‹IP Address for Static IP address mode
‹Network name if using a print server
—You might also need:
‹Gateway Address
‹Subnet Mask
—Your network personnel might ask you for the network name (if using a print server), the printer current IP address if using DHCP, or the MAC Address of the device.
1Load supplies and then power on the printer. See "Preparing the Printer" for the steps to follow.
2Power on the print server, if used. Record the default print server name, usually provided on the device label, or set the print server to use the IP address from network support personnel. See the information with the print server for instructions.
3Obtain or set the IP Address of the printer if you are not using a print server. See "Network Address Settings" for details.
4Log on to the PC as a user with Administrator access.
5Insert the driver CD in the PC’s drive. When the Card Printer Installation window opens, click “Install the Printer.”
6Click Continue on the User Account Control dialog box.
7On the License Agreement page, click “I accept the terms of the license agreement.“ to accept the license agreement and then click “Next.”
Installation will not continue unless you accept the license agreement.
If the Visual C++ dialog appears, allow it to continue and close by itself. Do not Cancel it!
Installation Guide | 44 |