Installation on Windows
11The Properties dialog box opens at the end of installation.
12Choose the Ports tab.
13Click the name of the printer and then click the Configure Port button.
14Click on the Enter Network Address box.
15Enter the IP address in the Enter Network Address dialog box, and then click “Test.”
16Wait for the “Successfully communicated . . . “ response.
—If the “Unable to communicate . . . “ response is displayed, troubleshoot a communication problem. See "Installation Troubleshooting".
—A “printer detected” message might appear. Allow it to go away on its own.
17Print a sample card.
a Choose Start > All Programs > Card Printer > Printer Name to open the Printer Toolbox.
If communication between the printer and the driver is suspended, click the “Resume” button.
bClick the Print Sample Card button. The driver prepares the sample card and sends it to the printer.
When the sample card prints successfully, installation is complete.
Installation with the Driver CD
The remaining instructions in this chapter use the Card Printer Driver CD for installation. For best results, use the driver CD when installing the printer.
Installation Guide | 22 |