Before You Install
6Write down the IP Address.
7Press the Enter key to return to the Network Status menu. "Subnet Mask" is displayed on Line 2. Press the Enter key to display the Subnet Mask.
8Press the Enter key to return to the Network Status menu. "Gateway Addr" is displayed on Line 2.
9Press the Enter key to display the Gateway Address.
10Press the Enter key to return to the Network Status menu. Press the Up or Down Arrow key to display "Exit" on Line 2.
11Press the Enter key repeatedly to return to the "Printer Ready" display.
Change the Address Mode to Static IP
Continue with the follow steps after determining the current Address Mode.
1With “Main Menu” displayed on line 1, press the Up or Down Arrow key to display "Configuration."
2Press the Enter key to enter the Configuration menu.
3With "Configuration" displayed on Line 1, press the Up or Down Arrow key to display "DHCP/ Static IP" on Line 2.
4Press the Enter key. The current Address Mode value is displayed on Line 2.
5Press the Up or Down Arrow key to display Static IP.
6Press the Enter key. Continue with "Change Static IP Values".
Change Static IP Values
Continue with the follow steps after setting the Address Mode to Static IP or verifying that the Address Mode is Static IP.
1If needed, move to the Configuration menu.
—With “Main Menu” displayed on line 1, press the Up or Down Arrow key to display "Configuration."
—Press the Enter key to enter the Configuration menu.
Installation Guide | 15 |