Installation on Windows
30With the printer icon highlighted, choose File > Properties to open the Properties dialog box.
31Choose the Ports tab, click once on the port for the printer, and then click the Configure Port button.
32Click on the Enter Network Address box.
33Enter the name or IP address of the printer or print server.
For best results with a print server and DHCP, use the print server name (not the IP address, which the network can change).
34Click the Test button. Wait to see the “Successfully communicate . .
“ message and then click OK to close the message. If the PC does not communicate with the printer, see "Installation Troubleshooting".
35Click OK to close the Enter Network Address dialog box.
36On the General tab of the Properties dialog box, click "Print Test Page" to print the Windows test page.
37Verify that the Windows test page prints. The image on the card is likely to be cropped; this is expected.
38Click OK when the card prints, and then close the Properties dialog box.
If you have not restarted the PC and the printer, the Windows test page might not print or might cause an error at the printer. Restart the printer: Do not follow Windows troubleshooting.
To continue, see "Set up the Unidirectional Printer".
Installation Guide | 43 |