Installation on Windows
23Choose Start > Control Panel > Hardware and Sound > Printers. The Printers window opens.
24Open the Properties dialog box for the printer as an Administrator:
a Click the icon for the printer to select it, then
c Choose “Continue” on the User Account Control dialog box to open the Properties dialog box.
25Choose the Ports tab, click once on the port for the printer, and then click the Configure Port button.
26Click once in the Enter Network Address box to activate it.
27Enter the name of the network adapter (if used) or IP address of the printer.
28Click the Test button. Wait to see the “Successfully communicated . . .” message and then click OK to close the message. If the PC does not communicate with the printer, see "Installation Troubleshooting".
29Click OK to close the Enter Network Address dialog box. Close Properties.
30Choose File > Printing Preferences to open the Printing Preferences dialog box.
—Choose the orientation for the card.
—Choose whether to print on both sides (a duplex module is required).
31Click the "Advanced" button to open the Advanced page.
32Change the Printer Type setting to match the printer installed.
33Click OK on the Advanced page and the Printing Preferences page to close them.
34Open the Advanced page of Printing
Preferences again. (The Printer Type setting might change the choices available.)
35The default Print Ribbon Type is YMCKT. If a different type of ribbon is installed in the printer, change the Ribbon Type.
36Change other settings, such as Duplex Method or Mag stripe settings, if needed to match the printer. Close the Printing Preferences dialog box.
37Open the Properties dialog again:
a Click the icon for the printer to select it, then
b Choose Properties on the popup menu. (Do not choose “Run as administrator” this time.)
38On the General tab of the Properties dialog box, click Print Test Page to print the Windows test page.
Installation Guide | 46 |