HP Card s 50

Installation on Windows

39Verify that the Windows test page prints. The image on the card is likely to be cropped; this is expected.

40Click Close when the card prints, and then close the Properties dialog box.

If you have not restarted the PC and the printer, the Windows test page might not print or might cause an error at the printer. Restart the printer: Do not follow Windows troubleshooting.

To continue, see "Set up the Unidirectional Printer".

Local Unidirectional Installation for Windows XP & Server 2003

This installation is possible only on PCs running Windows XP or Windows Server 2003.

1Load supplies and then power on the printer. See "Preparing the Printer" for the steps to follow.

2Insert the driver CD in the PC's drive. When the Card Printer Installation window opens, click "Exit" to close the window.

3Connect the printer to the PC using the USB data cable. The Found New Hardware wizard opens.

4Click "No, not this time." and then "Next" to continue.

5Choose to install the driver from a list or from a specific location and then click "Next."

6Choose "Do not search..." and then click "Next."

7On the Hardware Type window, choose "Printers" and then click "Next."

8On the Add Printer Wizard window, click the "Have Disk" button. Browse to the driver CD and choose the CardPrinter.INF file.

9Click "Open" and "OK" as needed to continue.

Installation Guide