Before You Install
2With "Configuration" displayed on Line 1, press the Up or Down Arrow key to display "IP Address" on Line 2.
3Press the Enter key to choose IP Address.
4The printer shows the current IP Address and a cursor appears under the first byte of the address. (The address byte shows three digits when it can be changed and the cursor appears under the
5Press the Up or Down Arrow key to change the numbers of the IP Address.
6When the first byte is correct, press the Enter key to move to the second byte.
7Repeat for the third and fourth byte of the IP Address. After entering the fourth byte of the address and pressing the Enter key, "Subnet Mask" appears on Line 2 of the LCD panel.
8Press the Enter key. The current Subnet Mask value appears with the cursor under the first byte. Set the Subnet Mask using the same process as the IP Address. After entering the fourth byte and pressing the Enter key, "Gateway Addr" appears.
9Press the Enter key. The current Gateway Address value appears with the cursor under the first byte. Set the Gateway Address using the same process as the IP Address.
10After entering the fourth byte of the Gateway Address and pressing the Enter key, "Apply/ Restart" appears.
11Press the Enter key to apply the values and restart the printer.
Installation Guide | 16 |