Installation on Windows
Install and Set Up the Driver
On each PC that will send jobs to the printer, install the driver for the card printer. Follow the steps in "Network Installation Using a Print Server & Bidirectional Communication" on page
27 with the following changes:
•Make sure that each printer has a unique name (such as Card Printer 1 or Card Printer 2) on the PC.
•Make sure you are logged in as the Administrator. (Users and Power Users cannot complete this task successfully.)
•For step 16, enter the print server name or IP address of the print server. If your network uses DHCP, use the print server name (not the IP address, which the network can change).
•The Print Sample Card button in the Printer Toolbox is enabled when the printer and driver communicate normally. If the Print Sample Card button is gray, check the following:
— The printer is suspended. Click the Resume button.
— The printer is busy processing a print job sent by another user on the network.
—The printer is paused. Check that the Status Light on the front of the printer is steady green.
See "Printing Cards Using Bidirectional Communication" to print cards.
Installation Guide | 35 |