HP CM1415fnw Color, CM1415fn Color manual An error occurred during a V.34 transmission

Table 6-5Fax send error codes (continued)

Error code Description Solution

396–409	An error occurred during a V.34 transmission
	when the receiving product was unable to correctly
	handshake with the sending product and was

consequently unable to transmit a T30 frame. This occurs when the line was disconnected or if line conditions degrade during the session.

Reattempt the fax transmission at a different time when telephone line conditions have improved.

410–419	An error occurred during a V.34 reception when
	the receiving product was unable to correctly
	handshake with the sending product and was
	consequently unable to transmit a T30 frame. This

occurs when the line is disconnected or if line conditions degrade during the session.

420V.34 negotiations have failed from the originating product during phase four, which occurs after V.8 and before the first T.30 frames are exchanged.

Compatibility problems have been observed in this area when sending to non-HP units.

421V.34 negotiations have failed from the originating product during phase three, which occurs after V. 8, before phase four, and before the first T.30 frames are exchanged. Compatibility problems have been observed in this area when sending to non-HP units.

422V.34 negotiations have failed from the answering product during phase four, which occurs after V.8 and before the first T.30 frames are exchanged.

423V.34 negotiations have failed from the answering product during phase three, which occurs after V. 8, before phase4, and before the first T.30 frames are exchanged.

430The transmitting product is unable to send continuous ones at the end of the control channel prior to starting the primary channel. This is a V.34 error. This error may be associated with line conditions although it is more likely to be due to internal problems with the modem.

216 Chapter 6 Solve problems ENWW