Column | Description |
|
|
Location | The location of the sensor object, as entered during |
| configuration. |
|
|
*If an external sensor is disconnected, then a red X appears in the sensor column. If a sensor needs maintenance, then a yellow X appears in the sensor column.
CRAH/CRAC tab
To view the CRAH/CRAC details for a specific zone:
1.From the Navigation panel, select the zone you want to display.
2.Select the CRAH/CRAC tab. The information for all CRAH/CRACs within that zone appears in the Tabular view.
NOTE: You can sort, resize, move, or hide columns. For more information about the appearance of columns, see Changing the appearance of columns (on page 13).
NOTE: If the system is collecting data from the sensors but cannot calculate a value, the CRAH/CRAC or rack objects might have a yellow status. This temporary situation is typically encountered during the installation process.
The header display area specifies the total number of CRAH/CRACs in the zone. The main display shows data, including status, name, location, and recent readings for each CRAH/CRAC, organized into columns.
3.
oSelect Show on floorplan to locate the CRAH/CRAC on your zone floorplan view.
oSelect Go to Data Analysis to open the Data Analysis window and highlight the selected CRAH/CRAC for reporting.
