a.Create a condition.
NOTE: You can evaluate the data values and metrics for rack and CRAH/CRAC objects. You can evaluate only data values for base station, pressure, and sensor objects.
Object | Values available |
|
|
Base station | Temperature |
| Humidity |
| Pressure |
| Voltage |
| Current |
| Energy |
| Liquid flow |
| Door status |
| Liquid presence |
| Remaining battery days |
|
|
Rack | Front top temperature |
| Front middle temperature |
| Front bottom temperature |
| Rear top temperature |
| Rear middle temperature |
| Rear bottom temperature |
| Reference temperature |
| Humidity |
| cTROf change |
| Cold dew point |
|
|
Pressure objects | Pressure |
|
|
CRAC | Supply temperature |
| Return temperature |
|
|
Sensor | Temperature |
| Humidity |
| Pressure |
| Voltage |
| Current |
| Energy |
| Liquid flow |
| Door status |
| Liquid presence |
|
|
b.Select the logical operator and enter the threshold value.
c.Select the ellipsis button to select all objects to apply the condition. Hold the Ctrl button while selecting objects to select multiple objects.
d.Select OK to save. The Objects & Conditions window closes, and the New Alert window appears.
5.Select the Recipients tab, and indicate who receives the alert notification messages when an alert is triggered.
a.Select the type of alert notification from the menu.
