Hardware Upgrades
4.Position the computer on its side with the rubber pads on the bottom. (If the computer is being used in the tower configuration, remove the computer from the stand. Refer to “Attaching and Removing the Tower Stand” on page
5.Remove the access panel. Refer to “Removing and Replacing the Access Panel” on page
6.Rotate the catch toward the right side of the computer until it is disengaged.
Releasing the MultiBay Security Catch
7.Replace the access panel.
8.Replace the stand, if desired.
9.Reconnect all external devices, plug the power cord into the power outlet, and turn the computer on.
10.Use Computer Setup to enable the Smart Cover Sensor, if desired.
Hardware Reference Guide | www.hp.com |
