Hardware Upgrades
10.Line up the tabs on the expansion card assembly with the slots on the computer chassis and press the assembly firmly down into place.
Installing the Expansion Card Assembly
11.Connect external cables to the installed card, if needed. Connect internal cables to the system board, if needed. If the card requires audio, connect the audio cable to the connector on the system board labeled “Aux” (located under the power supply cage).
12.Replace the access panel.
13.Install the optional cable lock, if desired.
14.Replace the stand, if desired.
15.Reconnect all external devices, plug the power cord into the power outlet, and turn the computer on.
16.Use Computer Setup to enable the Smart Cover Sensor, if desired.
Hardware Reference Guide | www.hp.com |
